Project BN-125

Project Details

Total area: 183.05 m2
Technology: Timber

The BN-125 project

A set of parts for a prefabricated bathhouse made of glued profiled timber under the code name "BN-125".

This bathhouse, resembling a gable roof and a circular bypass porch-terrace of the Russian terem, actually has a classic Alpine chalet house at its core, as evidenced by a fairly sloping roof that can hold snow to keep the house warm.

With a total area of 183 m2 and a living area of 42 m2, This two-storey sauna provides a comfortable space for rest and relaxation. It is divided into 3 rooms, including a kitchen and a living room, furnished in a chalet style. The large windows give it a light and refreshing atmosphere.

Wall kit:

• Glued, profiled timber with cups according to the project 180 mm high, 200 mm thick with protective treatment of the ends with the composition "Teknos JRM", with cutting grooves for the installation of casing boxes. The type of material is Spruce.

• Shaft sealer for corner joints of timber – Rave Line, Finland;

• The embedded board is dry planed 41*200 mm. Key for installation of windows and doors – dry planed bar 30*40 mm;

• Glued posts 200*200 mm.

Floor structures (Calculation of wooden structures is made for the type of support surface - a tape monolithic foundation):

• Ceilings (floor beams, frontal board);

• Cranial block – sawn block 40*50 mm; black floor board – sawn board 16 mm.

Coating designs:

• Rafter system (rafter legs, puffs, purlins, short linings);

• Counter–lattice - bar, planed 40*50 mm;

• The beacon rail is a sawn bar 25*50 mm. Black ceiling board – sawn board 16 mm;

• The crate is a sawn board of 25 mm.

Structures of internal frames:

• Internal frame partitions (racks, lintels, strapping – calibrated board);

• Timber imitation board – dry profile 19*177 mm.

Exterior finishing materials:

• The cornice board is a planed board of 20*120 mm. Exterior cladding for filing eaves overhangs – planed board 20*120 mm;

• Exterior trim for windows and doors – planed board 20*120 mm;

• The casing board is a glued board 42*200 mm.

Fasteners:

• A set of wall mounting kits (anchors, capercaillie, adjusting screws, embedded parts, shrinkage compensators);

• A set of floor fasteners (beam supports);

• A set of fasteners coatings (sliding supports, bolts, studs).