Project BN-136

Project Details

Total area: 129.25 m2
Technology: Timber

The BN-136 project

A set of parts for a prefabricated bathhouse made of glued profiled timber under the code name "BN-136".

This sauna is for those who like to combine active physical rest and lazy pastime in the steam room.

The advantages of the BN-136 are not limited to size. This Scandinavian-style bathhouse project is equipped with large windows, providing natural light and fresh air. The roof with two slopes creates a cozy atmospheric space, and an enclosed terrace and a porch with a canopy add practicality and comfort. The BN-136 sauna is an ideal place for relaxation and recovery, and we are ready to make your dream come true.

Wall kit:

• Glued, profiled timber with cups according to the project 180 mm high, 200 mm thick with protective treatment of the ends with the composition "Teknos JRM", with cutting grooves for the installation of casing boxes. The type of material is Spruce.

• Shaft sealer for corner joints of timber – Rave Line, Finland;

• The embedded board is dry planed 41*200 mm. Key for installation of windows and doors – dry planed bar 30*40 mm;

• Glued posts 200*200 mm.

Floor structures (Calculation of wooden structures is made for the type of support surface - a tape monolithic foundation):

• Ceilings (floor beams, frontal board);

• Cranial block – sawn block 40*50 mm; black floor board – sawn board 16 mm.

Coating designs:

• Rafter system (rafter legs, puffs, purlins, short linings);

• Counter–lattice - bar, planed 40*50 mm;

• The beacon rail is a sawn bar 25*50 mm. Black ceiling board – sawn board 16 mm;

• The crate is a sawn board of 25 mm.

Structures of internal frames:

• Internal frame partitions (racks, lintels, strapping – calibrated board);

• Timber imitation board – dry profile 19*177 mm.

Exterior finishing materials:

• The cornice board is a planed board of 20*120 mm. Exterior cladding for filing eaves overhangs – planed board 20*120 mm;

• Exterior trim for windows and doors – planed board 20*120 mm;

• The casing board is a glued board 42*200 mm.

Fasteners:

• A set of wall mounting kits (anchors, capercaillie, adjusting screws, embedded parts, shrinkage compensators);

• A set of floor fasteners (beam supports);

• A set of fasteners coatings (sliding supports, bolts, studs).